The parts are strengthened by surfacing welding. The welding material has high hardness and high wear resistance, which can resist material impact and friction, thus extending the service life of the rotor. The state of the rotor directly affects the working performance and service life of the whole machine. Therefore, for the rotor part, usually our after-sales personnel will remind customers that they need to take regular inspection and maintenance measures to ensure its normal operation.
It is recommended to conduct a comprehensive inspection of the rotor every once in a while (such as monthly or adjusted according to actual use), including but not limited to whether there is obvious damage to the appearance and whether there is a crack in the weld. In this way, potential problems can be detected in time and measures can be taken to solve them, preventing small failures from becoming big problems.
When putting materials into the scrap steel scrap aluminum crusher, it should be operated in strict accordance with the requirements of the instruction manual to avoid placing the steel with too large thickness or too high hardness directly into the machine. This is because these materials can exceed the capacity of the equipment, which increases the risk of rotor wear and even damage.
In case of holiday rest, the rotor surface and the surrounding area should be thoroughly cleaned after the final use to remove dust, debris and other impurities attached to it. This will not only reduce the additional wear and tear caused by foreign objects, but also help improve the efficiency of the return to work.
If the welding pile on the rotor is found to have dropped phenomenon, it is necessary to immediately stop production activities, and contact professional maintenance personnel as soon as possible to carry out repair work. It is worth noting that before carrying out any form of repair, please be sure to confirm that the materials and technology used meet the relevant standards to ensure that the final effect reaches the desired goal.
The daily implementation of effective management and maintenance of scrap steel scrap aluminum crusher rotor can significantly extend the service life of the equipment, but also to ensure that the production process is more smooth and efficient. I hope the above suggestions can help you!
山東路友廢鋼破碎機
銷售1部 路線 159 6399 9999
銷售2部 路海濱 182 0639 0588
銷售3部 梁毅 182 0639 7678
銷售4部 徐珂 137 9159 3388
銷售5部 程霞 137 9394 9986
銷售6部 路云翔 188 0513 4838
傳真電話：0539-6321688
公司地址：山東省臨沂市臨沭青云工業園
歡迎您的光臨，期待與您合作！
